Nitrogen-doped Graphene by Plasma Treatment

 Harrick Plasma → Applications → Materials → Graphene → Nitrogen-doped Graphene

Graphene, a single atomic layer of carbon with a hexagonal crystal structure, has been heavily investigated in the past decade for its many unique material properties. With its high electrical and thermal conductivity, near optical transparency, and high mechanical strength, graphene is considered a very promising 2D material for a broad range of applications, including energy storage, optical displays and sensors [1,2].

One challenge of working with graphene is the ability to process the material without compromising its structural integrity. With maximum applied powers of 10’s watts, our plasma cleaners are designed to affect surfaces only on an atomic level and are well-suited for treating graphene. In a series of application notes, we explore the multiple ways researchers have applied plasma treatment to tune the material properties of graphene.

NITROGEN Plasma

By using nitrogen (N₂) gas, plasma can be applied to incorporate N atoms into the graphene structure and, in turn, modify its electronic properties. Nitrogen is considered an ideal element for doping carbon materials because of its similar atomic size and favorable electron configuration to form strong covalent bonds with carbon [3]. The following papers describe applying N₂ plasma to create N-doped graphene with semiconducting characteristics.

Wang et al. studied the modification of the intrinsic properties of graphene to enhance its performance in electrocatalysis and biosensing applications. By controlling the plasma exposure time, they produced N-doped graphene with varying dopant concentrations. Based on TEM imaging, a schematic was proposed where N-doped graphene maintained a planar, 2D structure, even after plasma treatment. The authors suggested that N atoms substitute into the graphene lattice with the presence of periodic defects. This induced a change in the electronic band structure and opened the energy bandgap to create semiconducting graphene.

The chemically-modified graphene was further assessed through electrochemical measurements and fabrication of biosensor devices with the graphene as the electrode material. Wang et al. found that N-doped graphene displayed good electrocatalytic activity for reduction of H₂O₂ and high selectivity and sensitivity for glucose biosensing. However, extended plasma exposures (>40 min) led to diminished electocatalytic activity, indicating destruction of the graphene layer.

Yanilmaz et al. investigated optimal plasma conditions to produce N-doped graphene for potential electronic and optical applications. Optimal process conditions were required to bind N to plasma-generated defects (step edges) without formation of excessive defects that can dismantle the planar structure of graphene. Prolonged plasma treatment (>30 min) and higher power destroyed the lattice structure and etched graphene without doping. Effective doping was attained with 15 min plasma treatment at Medium RF power, where the resulting N-doped graphene was homogeneous across a 20 μm x 20 μm area. Experimental results and theoretical calculations suggested that periodic adsorption of N atoms occurs on top of the C atoms rather than through N substitution within the graphene lattice.

Supplemental References (Do not report using Harrick Plasma instruments)

[1] Allen MJ, Tung VC and Kaner RB. “Honeycomb Carbon: A Review of Graphene”. Chem. Rev. 2010 110(1): 132-145.

[2] Choi W, Lahiri I, Seelaboyina R and Kang YS. “Synthesis of Graphene and Its Applications: A Review”. Crit. Rev. Solid State 2010 35(1): 52-71.

[3] Wang H, Maiyalagan T and Wang X. “Review on Recent Progress in Nitrogen-Doped Graphene: Synthesis, Characterization, and Its Potential Applications”. ACS Catal. 2012 2: 781-794.